Відео

How can I know which one is the power in the auger motor

I purchased the 1100i from an individual who decided they just wanted a gas fireplace insert. I hired an installer and it looks great but did have a few issues, which I understood could happen with a pre-owned unit. I found the manual online, but it just doesn't have much detail. I was so thankful to find this video! I actually copy/pasted the transcript into an Excel file. Then I could use the "find" feature to search the transcript text for exactly what I need and where to find it in the video! Game changer! My insert is running perfectly now and I was able to fix the issues myself. Well, I did have to order and install a new control box, but still, I did it myself! thank you for this excellent detailed video!

Hi! I just picked up an original whitfield legend stove in good condition but I'm curious about how it ignites? I don't see where an igniter even goes what am I missing and do you have the part?

I have one that I’m using right now. I have all the papers for it, even the original bill of sale from 1982. I have no idea what the handle in back is supposed to do. Opens up a little silver flap. What is that. The knob above the side door opener, what is that to?

This is my second Hearthstone Heritage stove, and I am less than satisfied. It's all about the draft. Otherwise, all the great features you mention are much appreciated, which is why I bought a second one. The first stove (cast iron finally got burned out - no complaints) had a less finely engineered draft system, so it actually was controllable (separate top and bottom drafts and even a bi-metalic thermostat on the intake flapper). This one, now about 15-20 years old, has always required the loading door to remain ajar while starting (not really safe) and the little single slider draft valve (lower left, facing the front) is supposed to do it all (designed-in up/down airflow balance?) after the stove finally gets going. Most of the time over the years, after that fussy start-up effort, the draft does what it is supposed to, with the control range of the draft managing the burn rate reasonably reliably. Lately, though. The stove is even more fussy to start up, going out with the draft fully "open" after the 20 minute door-open period has a good fire started (even that is slower than usual). When a good fire is finally established, I can detect an even-less-than usual difference between fully open and fully closed draft settings, but fully open is required to burn up all the wood (mostly fir and maple, cut large, seasoned in a loose pile outside all summer and in the woodshed since before the rains started - same as the past 40 years). Also, the draft lever is not moving smothely any more. It pivots OK, but then disappears into some inaccessable space so I can't tell what the hang-up is. It does move full swing , though. The flu is clear, as when I (more often now) resort to opening the clean-out door, I get a roaring inferno; not safe, but satisfying after messing with the first hour or so of getting a fire started. Any ideas or explanations? Dean

This is something that I certainly need. I have an old Earthstove MP250. I cannot find parts for it too easy. Until now. I know there's people out there who have this same stove or even different Earthstoves. Thank you.

I bought one of these due to this video.

We had one in upstate new york . There was nothing i liked about it.

Thank you so much! 30 seconds in and voila! Fikist!

I have a similar model - no side loading. First time operating.... is there a way to control oxygen into the chamber so that you can manage the speed of burning/temp?

Holly will you work for me at 607 pellet stoves?

Well that was a complete waste of my time!wtf if the instructions got misplaced or lost!! Thanks for nothing

Duravent has the WORST and inadequate instructions for their products, which is mind-boggling considering the potential liability issues. Thanks to dealers for posting videos like this, but you shouldn't have to be using hammers to make adjustments so that parts will fit.

Not even a location

really? what a waste of 48 sec of my life. misleading title 'replacement'. just go back to making photo copies of your paper there!

Oklo polo

$1999? $4k in 13 yrs later.

On each video, video tape seems to run out before last statement is made.

Does McD's accept those "dollar bills" you tested with? looks fake like the green ones I get from bank

Can you do a video on putting on the heat shield and blower? They forgot to order ours with it on so they sent it to us to put on with no instructions :(

I have a SP22 serial number 2444

I recently bought a SP22 Maverick pellet stove. For $40. Needed some repair. Bought a new augur motor. The problem I'm having is. Where to wire it up to the wire harness. The control switch and everything is fine. Just don't know where to connect the wires from the motor to the wire harness.

Garbage video

No information dude what a waste of my time !

Good video, just too many cut off sentences and steps taken

I need an adaptor for this specific application only I need the adaptor that receives single wall pipe going into it.

Too many skip overs at important points

We bought a home and there is a stove already installed into fireplace. I think exactly like this one. What is the model number of this particular one?? Can’t find it! Help please :)

Why didn't you USE an old stove and gasket?? Not helpful at all.

I have that same replacement control panel on our TP340 . How does it work/ operate...I can't find ANYTHING online. Do I press start and let it do it's thing.HELP!!!!!

Have a TP40. First year using it but it was used by previous owner. The draft fan is pretty noisy thinking of getting a new ine. The adjustment round door has fallen off and broke. The Rivet. How can I fix this?

Can you cook on it? I've been trying to get an answer from Hearthstone, still waiting...

Useless fucking video.

It is my understanding that the single wall pipe adapter goes on the inside. It is the first thing that you put in the box from the other side and the box probably doesn't need to be cut in order to make it fit. That is what the directions for an installation that I'm researching. Turns out they didn't even use the adapter.

Ugh watching a useless video 2 years in a row . I made sure this time I clicked dislike to remind me not to bother watching this video .

My adapter came without the inner sleeve and I am pissed

COULD YOU POSSIBLY ANSWER YOUR EMAIL? I sent 3 now about an order I placed over 3 weeks ago and still haven’t received the item nor an email back from you. It would be nice if you had a phone number to contact someone also

Did you let your 8 year old edit this

I have had one of these for 16 years now. Great stove nice even heat, no problems at all good quality. Highly recommend it.

Are U drunk?

If i ever have to replace my water pump ill call ya...or was that a termostat???

Worthless

What a waste.... why do you think any of us clicked on this video...we didn't get the instructions or had more questions than the ones we got answered....as little help as this comment is it's more help than the video.... SMH

We had a Shelburne installed in 2017. Very happy with it.

Wish I'd known about the tax incentive 5 years ago!!!

I was just given the exact stove for free. Any tips or things to look for? Also. I cant find the room blower. I found the combustion and exhaust fan. But cant locate the room air fan

Who the F**k gave this a thumbs down? Excellent video !

Like the stove but the ash pain looks to be a huge pain in the but how it's open in the back. That's the only down fall I have with it.

What is the point of this video?

craftsbury is not convective. it is only by radiation.